Informasi lengkap jaringan pipa air, gas dan geomembrane HDPE.

Warga Tehnik Mekanika

Butt Fusion Machine
 Butt Fusion Machine adalah mesin las pipa HDPE yang paling banyak digunakan disamping mesin las socket fusion dan electro fusion. Nama lain dari mesin penyambung pipa HDPE ini  adalah MESIN LAS HDPE, MESIN HDPE, MESIN BUTT FUSION dan Mesin las pipa PE.

Gapura Fajar Langgeng menjual dan juga menyewakan mesin las HDPE untuk segala ukuran pipa. Kami siap menyambung pipa HDPE anda dari mulai OD 63mm hingga 1600mm. Ready stock dalam jumlah banyak untuk segala ukuran mesin berikut tenaga welder nya.

Beberapa alasan menggunakan mesin las HDPE / butt fusion adalah sebagai berikut:
  • Paling ekonomis dibanding dengan socket fusion maupun electro fusion
  • Kuat dan tahan lama
  • Pemeliharaan mesin tergolong mudah.
  • Tersedia dalam aneka range ukuran
Berikut kami sajikan spesifikasi dari mesin butt fusion yang kami jual dan sewakan:


SHD160/63 Hydraulic butt fusion welding machine





Hydraulically operated butt welding machine, suitable for PE, PP and PVDF pipes and fittings. High quality design and construction provides an excellent machine for welding both on the worksite and in the factory. The use of high quality Aluminum castings allows for lower weight without compromising strength and performance. Can be integrated with optional data logger
Technical specifications:
* Main frame includes four light weight alloy main clamps of 160mm diameter
* Welding range 63mm to 160mm OD
* Layer clamps: 160x140, 140x125, 125x110, 110x90, 90x75, 75x63 (mm)
* Optional 2 piece liners: 160x140, 160x125, 160x110, 160x90, 160x75, 160x63 (mm) * German hydraulic seals
* Removable PTFE coated heating plate with high accurate temperature control system
* Removable cast Aluminum electrically operated facing tool with current overload protection * Electro-hydraulic pump with controls, and quick release hose
* Separate two-channel timer records time in soaking and cooling phases
* Working voltage: single phase
~220V ±10%, 50Hz (total power: 2.75kw, including trimmer: 1.0kw, heater: 1.0kw, hydraulic unit motor: 0.75kw)
~240V ±10%, 50Hz (total power: 2.94kw, including trimmer: 1.0kw, heater: 1.19kw, hydraulic unit motor: 0.75kw)
Optional 60Hz also available
* Environment temperature: 10°45°
* Whole machine consists of basic frame, heater, trimmer, hydraulic unit and support (for heater & trimmer)
* Optional stub end device for welding end fittings
* Optional wheeled trolley available



SHD250/90 Hydraulic butt fusion welding machine

 

 


Hydraulically operated butt welding machine, suitable for PE, PP and PA:1F pipes and fittings. High quality design and construction provides an excellent machine for welding both on the worksite and in the factory. The use of high quality Aluminum castings allows for lower weight without corn prom ising strength and performance. Can be integrated with optional data logger

 
Technical speciffcations:
*    Main frame includes four light weight alloy main clamps of 250mm diameter
* Welding range 90mm to 250mm OID
*Layer clamps: 250x225, 225x200,200x180,180x160,160x140,140x125,125x110,110x90 (mm)
*    Optional 2 piece liners: 250x225,250x200,250w180,250x160,160x140,160x125,160x110,160x90 (mm)
*German hydraulic seals
*    Removable PTFE coated heating plate with high accurate temperature control system
*Removable cast Aluminum electrically operated facing tool with current overload protection
*    Electro-hydraulic pump with controls, and quick release hose
*    Separate two-channel timer records time in soaking and cooling phases
*Working voltage: single phase
-220V =10%, 50Hz (total power: 3_95kw, including trimmer:1_11(w, heater: 2.1kw, hydraulic unit motor: 0.75kvv)
-240V =10%, 50Hz (total power: 4.35k-vv, including trimmer: likw, heater: 2.5kw, hydraulic unit motor: 0.75kw)
Optional 60Hz also available
*    Environment temperature:    10= ...45C
*Whole machine consists of basic frame, heater, trimmer. hydraulic unit and support (for heater & trim 9-1er)
*    Optional stub end device for welding end fittings
*    Optional wheeled trolley available

 


SHD315/90 Hydraulic butt fusion welding machine

 


Hydraulically operated butt welding machine, suitable for PE, PP and PVDF pipes and fittings. High quality design and construction provides an excellent machine for welding both on the worksite and in the factory. The use of high quality Aluminum castings allows for lower weight without compromising strength and performance. Can be integrated with optional data logger
Technical specifications:
* Main frame includes four light weight alloy main clamps of 315mm diameter
* Welding range 90mm to 315mm OD
* Layer clamps: 31 5x280,280x250,250x225,225x200,200x1 80,1 80x1 60,1 60x1 40,1 40x1 25, 125x110,110x90 (mm)
* Optional 2 piece liners: 315x280,315x250,315x225,315x200,315x180,315x160,160x140, 160x125,160x110,160x90 (mm)
* German hydraulic seals
* Removable PTFE coated heating plate with high accurate temperature control system
* Removable cast Aluminum electrically operated facing tool with current overload protection * Electro-hydraulic pump with controls, and quick release hose
* Separate two-channel timer records time in soaking and cooling phases
* Working voltage: single phase
~220V ±10%, 50Hz (total power: 4.95kw, including trimmer: 1.1kw, heater: 3.1kw, hydraulic unit motor: 0.75kw)
~240V ±10%, 50Hz (total power: 5.55kw, including trimmer: 1.1kw, heater: 3.7kw, hydraulic unit motor: 0.75kw)
Optional 60Hz also available
* Environment temperature: 10°45°
* Whole machine consists of basic frame, heater, trimmer, hydraulic unit and support (for heater & trimmer)
* Optional stub end device for welding end fittings
* Optional wheeled trolley available





SHD450/200 Hydraulic butt fusion welding machine

 


Hydraulically operated butt welding machine, suitable for PE, PP and PVDF pipes and fittings. High quality design and construction provides an excellent machine for welding both on the worksite and in the factory. The use of high quality Aluminum castings allows for lower weight without compromising strength and performance. Can be integrated with optional data logger
Technical specifications:
* Main frame includes four light weight alloy main clamps of 450mm diameter
* Welding range 200mm to 450mm OD
* Layer clamps: 450x400,400x355,355x31 5,31 5x280,280x250,250x225,225x200 (mm)
* Optional 2 piece liners: 450x400,450x355,450x315,450x280,315x250,315x225,315x200 (mm) * German hydraulic seals
* Removable PTFE coated heating plate with high accurate temperature control system
* Removable cast Aluminum electrically operated facing tool with current overload protection * Electro-hydraulic pump with controls, and quick release hose
* Separate two-channel timer records time in soaking and cooling phases
* Working voltage: three phases
~380V ±10%, 50Hz (total power: 8.2kw, including trimmer: 1.5kw, heater: 5.2kw, hydraulic unit motor: 1.5kw)
~415V ±10%, 50Hz (total power: 9.2kw, including trimmer: 1.5kw, heater: 6.2kw, hydraulic unit motor: 1.5kw)
Optional 60Hz also available
* Environment temperature: 10°45°
* Whole machine consists of basic frame, heater, trimmer, hydraulic unit and support (for heater & trimmer)
* Optional stub end device for welding end fittings
* Optional wheeled trolley available




SHD630/315 Hydraulic butt fusion welding machine

 


Hydraulically operated butt welding machine, suitable for PE, PP and PVDF pipes and fittings. High quality design and construction provides an excellent machine for welding both on the worksite and in the factory. The use of high quality Aluminum castings allows for lower weight without compromising strength and performance. Can be integrated with optional data logger
Technical specifications:
* Main frame includes four light weight alloy main clamps of 630mm diameter
* Welding range 315mm to 630mm OD
* Layer clamps: 630x560, 560x500, 500x450, 450x400, 400x355, 355x315 (mm)
* Optional 2 piece liners: 630x560, 630x500, 630x450, 630x400, 450x355, 450x315 (mm) * German hydraulic seals
* Removable PTFE coated heating plate with high accurate temperature control system
* Removable cast Aluminum electrically operated facing tool with current overload protection * Electro-hydraulic pump with controls, and quick release hose
* Separate two-channel timer records time in soaking and cooling phases
* Working voltage: three phases
~380V ±10%, 50Hz (total power: 12.2kw, including trimmer: 1.5kw, heater: 9.2kw, hydraulic unit motor: 1.5kw)
~415V ±10%, 50Hz (total power: 14kw, including trimmer: 1.5kw, heater: 11kw, hydraulic unit motor: 1.5kw)
Optional 60Hz also available
* Environment temperature: 10°45°
* Whole machine consists of basic frame, heater, trimmer, hydraulic unit and support (for heater & trimmer)
* Optional stub end device for welding end fittings
* Optional wheeled trolley available




SHD800/450 Hydraulic butt fusion welding machine

 



Hydraulically operated butt welding machine, suitable for PE, PP and PVDF pipes and fittings. High quality design and construction provides an excellent machine for welding both on the worksite and in the factory. The use of high quality Aluminum castings allows for lower weight without compromising strength and performance. Can be integrated with optional data logger
Technical specifications:
* Main frame includes four light weight alloy main clamps of 800mm diameter
* Welding range 450mm to 800mm OD
* Layer clamps: 800x710, 710x630, 630x560, 560x500, 500x450 (mm)
* Optional 2 piece liners: 800x710, 800x630, 630x560, 630x500, 630x450 (mm)
* Low starting pressure and high reliable German hydraulic seals
* Removable PTFE coated heating plate with high accurate temperature control system
* Removable cast Aluminum electrically operated facing tool with current overload protection * Electro-hydraulic pump with controls, and quick release hose
* Separate two-channel timer records time in soaking and cooling phases
* Electric overhead crane is included with standard machine
* Working voltage: three phases
~380V ±10%, 50Hz (total power: 17.5kw, including trimmer: 1.5kw, heater: 12.5kw, hydraulic unit motor: 3kw, electric hoist: 0.5kw)
~415V ±10%, 50Hz (total power: 20kw, including trimmer: 1.5kw, heater: 15kw, hydraulic unit motor: 3kw, electric hoist: 0.5kw)
Optional 60Hz also available
* Environment temperature: 10°45°
* Whole machine consists of basic frame, heater, trimmer, hydraulic unit, support (for heater & trimmer) and electric overhead crane
* Optional stub end device for welding end fittings
* Optional wheeled trolley available



SHD1200/630 Hydraulic butt fusion welding machine

 

 

Hydraulically operated butt welding machine, suitable for PE, PP and PVDF pipes and fittings. High quality design and construction provides an excellent machine for welding both on the worksite and in the factory. The use of high quality Aluminum castings allows for lower weight without compromising strength and performance. Can be integrated with optional data logger
Technical specifications:
* Main frame includes four light weight alloy main clamps of 1200mm diameter
* Welding range 630mm to 1200mm OD
* Layer clamps: 1200x1 000, 1000x900, 900x800, 800x710, 710x630 (mm)
* Optional 2 piece liners: 1200x1000, 1200x900, 1200x800, 800x710, 800x630 (mm) * Low starting pressure and high reliable German hydraulic seals
* Removable PTFE coated heating plate with high accurate temperature control system
* Removable cast Aluminum electrically operated facing tool with current overload protection * Electro-hydraulic pump with controls, and quick release hose
* Separate two-channel timer records time in soaking and cooling phases
* Electric overhead crane is included with standard machine
* Working voltage: three phases
~380V ±10%, 50Hz (total power: 29kw, including trimmer: 3kw, heater: 22kw, hydraulic unit motor: 3kw, electric hoist: 1kw)
~415V ±10%, 50Hz (total power: 33.2kw, including trimmer: 3kw, heater: 26.2kw, hydraulic unit motor: 3kw, electric hoist: 1kw)
Optional 60Hz also available
* Environment temperature: 10°45°
* Whole machine consists of basic frame, heater, trimmer, hydraulic unit, support (for heater & trimmer) and electric overhead crane
* Optional stub end device for welding end fittings
* Optional wheeled trolley available

Hubungi kami untuk pembelian dan sewa butt fusion machine:

Warga Tehnik Mekanika (WTM),
Jalan dr. Ratna no.1001-5,
Kavling BNI 46,
Jatibening (depan toko besi INDO BAJA), Bekasi 17421
rudy_prmd@yahoo.com
0816 877 518 (WA), 0813 8189 7820

#jualpipahdpe
#kontraktorpipahdpe
#jualcompressionfitting
#jualbuttfusionfitting
#jualmesinbuttfusion
#sewamesinlashdpe
#jualgeomembranehdpe
#jualsegmentedfittinghdpe



1 Komentar untuk "Warga Tehnik Mekanika"

Jarwostok
0812 801 36 339
021 958 64 718
jarwostok@gmail.com
http://distributorhdpe.webs.com/jarwostok.htm
http://mesinpenyambungpipahdpe.weebly.com/
http://miningpipe.blogspot.com/2012/03/jarwostok-is-hdpe-piping-system-company.html

Back To Top